OKM
Technical solutions for orthopaedics
Languages
|
Patients with disabilities, scoliosis, an deformities with limited mobility require a correct seating posture in order to avoid excessive pressure, minimising the appearance of ulcers and sores, thus improving the patient´s quality of life. This system allows the manufacture of made-to-made measure seats, from taking the patient's mould to adding the finishing touches. The result is an economically produced seat, perfectly adjusted to the physiologivcal needs of the patient. |
Characteristics
– Uniform expansion.
– Allows filling to take place in various phases.
– Rapid, economical manufacture.
– Wide choice of densities and hardness.
– Choice of colours and finishes.
– Adaptability and comfort.
– OKM FLEX PAINT seals the unit and hides irregularities.
Observations
In the majority of cases, doubt arises as to which product to use, without generalisign it can be said that OKM FLEXFOAM 80 is normally used for children, OKM FLEXFOAM 110 for older children and adulst.
With OKM FLEX PAINT, the seat can be painted to achieve a suitable finish. This paint has been specifically developed for this PU.
(Consult our user manual for made-to-measure seats)
Materials to be used (References on the containers)
| PRODUCT |
1 KG |
2 KG |
5 KG |
25 KG |
250 KG | |
| OKMFLEXFOAM 80 | FF-080-02 | FF-080-05 | FF-080-25 | FF-080-250 | ||
| OKMFLEXFOAM110 | FF-110-02 | FF-110-05 | FF-110-25 | FF-110-250 | ||
| OKM ISO 120 | IS-120-02 | IS-120-05 | IS-120-25 | IS-120-250 | ||
| OKM DESMOLD F | DF-02 | DF-05 | ||||
| OKM ISOLATE C | ISC-02 | ISC-05 | ||||
| OKM FLEXPAINT | FP-02 | FP-05 | FP-25 | |||
| OKM DISFER | FP-01 | DPK-20-02 | DPK-20-05 | DPK-20-25 |
